bronze hydraulic balancing valve design

How Bronze Hydraulic Balancing Valve design works

Bronze Hydraulic Balancing Valve Distributors allow free flow of oil from valve port 2 (usually the supply side of the multi-way valve) to port 1 (usually the cylinder or motor side), as we can see from the top structural diagram below. Out, when the oil pressure of Bronze Hydraulic Balancing Valve Dimensions valve port 2 is greater than the pressure of valve port 1, the valve core in the green part moves to valve port 1 under the drive of hydraulic pressure, the one-way valve opens, and the oil can freely flow from 2 Flow to port 1, which is the positive opening principle of the Bronze Hydraulic Balancing Valve Diagram.

The liquid flow from valve port 1 to valve port 2 is blocked. Only when the pressure of pilot port 3 reaches a certain value, move the blue spool to the left to open the valve port, and the oil can flow from valve port 1 to the valve. Port 2 flows. When the pilot pressure is insufficient to open the blue spool, the port closes. The liquid flow from valve port 1 to valve port 2 is blocked, which is the reverse opening principle of the bronze hydraulic balancing valve.

6. Connector size of pressure pipe: 1/2” pipe thread