Bayaanka Asturnaanta
Pdf is encrypted. Please provide your email address and enter your password to access
We provide PDF for you to look at the catalog, and you need to provide an email address.
Catalogs Free We provide PDF for you to look at the catalog, and you need to provide an email address.
Suction Diffuser Valve
Suction Diffuser is installed at the suction side of the pump. The angle between inlet and outlet is 90 degree. Each inlet and outlet have two PT1/4" port which can measure pressure or temperature. The total flow area of the screen is more than 5 times that of the outlet port, which fully meets the water demand of the pump. Outside the screen is a 20-mesh start-up screen which blocks most of the fine impurities in a new system that is just starting to run. The valve is provided with a drain outlet and a round table for the welding bracket.
Solenoid Control Valve
Solenoid Valve consists of a basic valve and a solenoid switch. The solenoid switch can receive the signal of opening or closing and make the corresponding action of opening or closing. Therefore, it can control the liquid flow into and out of the control chamber of the main valve, so as to control the valve to close or open. The needle valve of the pilot pipe systemon pipe can independently control the opening and closing speed of the valve, so as to avoid the water hammer and vibration phenomenon common to the solenoid valve.
Remote Control Float Valve
Remote control float valve can maintain the water level in the water storage tank at a relatively stable level through hydraulic control. The floating switch is installed at the high water level of the water storage tank and connected to the main valve by pipeline. When the water level rises and exceeds the maximum limit, the float switch is completely closed and the valve is automatically closed. When the water level drops to the lowest limit level, the float switch is fully opened and the valve is automatically opened to fill water to the water tank until the water level in the water tank is controlled within a stable ideal range. If the optional check feature is selected, when the reverse pressure is generated, the backflow fluid will enter the upper chamber, closing the valve and preventing the flow back.
Pressure relief / sustaining / Back pressure Valve
Pressure relief/sustaining/back pressure valve can maintain the pressure of the upstream pipeline. It is a diaphragm type control valve controlled by hydraulic pressure of pipeline throught pressure relief pilot. The valve can be used for pressure relief, pressure sustaining, back pressure impact and other working conditions. When working, the valve senses the pressure of inlet of the valve through the pressure relief pilot, which controls the valve to open and to close. When the inlet pressure exceeds the set value, the valve opens rapidly to maintain the pressure in the pipeline. After the pressure is released, the valve is slowly closed to prevent water hammer impact. If the optional check feature is selected, when the reverse pressure is generated, the backflow fluid will enter the upper chamber, closing the valve and preventing the flow back.
Pressure Differential Valve
Pressure differential valve is a fully automatic, hydraulic control valve. It is designed to maintain the differential pressure between the two pipelines, so as to avoid the differential pressure exceeding the system bearing range due to the action of other valves or the change of flow demand. When the differential pressure increases, the valve will open, and it will close automatically when the differential difference drops
Bayaanka Asturnaanta
Buuxi macluumaad dheeri ah si markaa si dhakhso leh ula xiriiri karto
Bayaanka Asturnaanta