Hydraulic Solenoid Valve Water Supply Solenoid Valve DN200

There is a closed air chamber inside the water hammer arresters, and the lower end is a piston. When the shock wave is introduced into the water hammer arresters, the water hammer wave acts on the piston, and the piston will move towards the air chamber. The stroke of piston movement is related to the gas pressure and water hammer wave in the gas chamber. The piston moves up and down under the double action of gas and irregular water hammer with a certain pressure to form a dynamic balance, which effectively eliminates the irregular water hammer wave vibration.

The setting of the HYDRAULIC CONTROL VALVE in the project should have enough space for management, operation, installation and maintenance, and should meet the requirements of the pipeline for the valve.
When the pipeline is connected by flange, the Hydraulic Control Valve with flange connection shall be used; when the pipeline is connected with groove, the hydraulic control valve with groove connection shall be used.
The hydraulic control valve should be set on the pipeline where the medium flows in one direction.
The direction of the arrow on the main valve body of the hydraulic control valve must be consistent with the flow direction of the piping system.
There should be no gas blockage or gas blockage in the pipe section connected to the hydraulic control valve. An automatic exhaust valve should be installed in the gas storage section such as the highest position of the pipe network.