How to install the multi-function desktop socket? Multi-function desktop socket installation precautions

First, the desktop socket installation

1. Firstly, according to the multi-function sockets of different product models, first measure the required data, open the holes according to the collected data, reserve a position in the place where the socket needs to be installed, and make the route planning.

2. Place the junction box inside the open mounting hole and secure the terminal block with screws.

3. Then connect the cables. When connecting, make insulation treatment. The length of the desktop socket cable needs to be longer, which can make the junction box bounce smoothly.

4. Arrange the cables reasonably, and finally assemble them, then check to see if the screws are tight.

Second, the desktop socket installation note

1. During installation, do not allow water to enter, it is easy to cause electricity. If water enters, dry it with a dry towel, wait for it to dry naturally, continue to install, try to keep the desktop socket dry and clean.

2. The input voltage of the desktop socket is 180V-220V/50HZ. When installing the desktop socket, the grounding wire must be grounded to ensure the safety of the user. If there is leakage, the power can be automatically cut off to stop the appliance.

3. When installing the desktop socket, it must be arranged first, it can not affect the normal use of the table, try to install it in a relatively hidden place, or a location that is not used often.

4. The desktop socket is installed. It is necessary to test one by one, check whether it can be used normally, and do waterproof and moisture-proof measures to avoid affecting future use.