Multi-function water pump control valve overview

The diaphragm type multi-function water Pump Control Valve is a water Pressure Control Valve. The water pump control valve is composed of a main valve and its attached duct, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose, function and location, it can be evolved into a remote control float valve, Pressure Reducing Valve, slow closing check valve, flow control valve, Pressure Relief Valve, hydraulic electric control valve, water pump control valve and so on.
The diaphragm type multi-function water pump control valve is a water pressure control valve. The water pump control valve is composed of a main valve and its attached duct, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose, function and location, it can be evolved into a remote control float valve, pressure reducing valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic electric control valve, water pump control valve and so on.

Filters should be installed in front of the pump control valve and should be easy to discharge.

The pump control valve is a self-lubricating valve body that does not require additional oil lubrication. If the components in the main valve are damaged, please follow the instructions below for disassembly. (Note: the damage to the inner valve is generally diaphragm and
However, when applying hydraulic control VALVES in engineering, there are still some misunderstandings, such as the applicable conditions of the valve, the design requirements of the valve, the installation points, etc.

For more information on valve products, please visit: http://


Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn