Industry Information

Update February 15, 2022

Solenoid valves are electromagnetically controlled industrial equipment used in industrial control systems to adjust the direction, flow, speed, and other parameters of the media. The solenoid valve...

Update February 14, 2022

Multi-function pump control valve working principle

The new multi-function water pump control valve installed on the outlet pipe of the centrifugal pump has three functions of gate valve, check valve and water hammer canceller. This paper introduces...

Update January 30, 2022

Introduction Multi-function pump control valve technical requirements

This standard applies to the nominal pressure PN1.0MPa-PN4.0MPa, nominal diameter of DN50mm-DN1200mm multi-function pump control valve. The standard technical requirements are introduced as follows:...

Update January 29, 2022

Multi-function pump self-flow control valve standard technology

This standard applies to the nominal pressure of PN1.0MPa-PN4.0MPa, nominal diameter DN50mm-DN1200mm multi-function pump control valve. Now the standard technical requirements are described below: 1...

Update January 28, 2022

Piston multi-function pump control valve of the main features

DS101 / 201 piston-type multi-function pump control valve is mainly used to install large-diameter water supply pipe network in the pump outlet, to prevent media backflow, water hammer and water...

Update January 27, 2022

Butterfly oblique seal multi-function check valve introduction

Butterfly oblique sealing multi-function check valve is mainly used for water supply and drainage piping system, at the exit from the slow, slow closure, check the role of anti-reverse flow of media...

Update January 26, 2022

Piston multi-function pump control valve structure is what?

Piston-type multi-function pump control valve for high-rise building water supply system and other water supply system of the pump outlet pipe to prevent and reduce the water pump when the pump...

Update January 25, 2022

About multi-function "pump control valve" standard brief introduction

This standard applies to the nominal pressure of PN1.0MPa-PN4.0MPa, nominal diameter of DN50mm-DN1200mm multi-function pump control valve. The standard technical requirements are introduced below: 1...

Update January 24, 2022

Multi-function pump control valve technical requirements

Update January 23, 2022

New multi-function pump control valve principle introduction

Abstract: The new multi-function pump control valve installed on the outlet pipe of centrifugal pump has three functions of gate valve, check valve and water hammer eliminator at the same time. This...